These instructions apply for both non-woven “N” and vinyl “V” qualities.
Each roll contains 10 m/10.9 yd of continuous wallpaper made up of panels, each with a 50 cm/19.7”width.
Tools: Scissors, cutter, cellulose wall covering glue (non-woven), brush or roller, rubber spatula for wall coverings, cloth, bucket and a long ruler.
Cut the first panel, using the height of the wall as a reference. Add 3 cm/1,18” at the top and the bottom (Total height of the wall + 6 cm/2,36”).
Prepare the cellulose glue in a bucket following the manufacturer's instructions.
Apply the cellulose glue with a brush or roller only onto the wall and spread it evenly across the surface.To achieve an optimum adhesion, apply the glue to a slightly larger surface than the panel.
Apply the first dry panel from left to right and from top to bottom, smoothing it down with a plastic
wallcovering spatula or a cloth to eliminate air bubbles.
Check the match of the second panel before repeating the cutting process in nº 2, and before repeating the processes in nº 4 (applying the glue) and nº 5 (applying the wall covering and smoothing it down) as many times as needed to cover the wall. The joins of the wall covering panels should not overlap.
With a damp cloth, gently remove glue leovers.
Cut the remaining wall covering with a cutter, using a ruler to guide the cutter.
Do you wish to know more about a fabric?
Get in touch with our team, through contacts
or our online assistant.
Recover your Lost your password? Please enter your email address. You will receive a link to create a new password via email.